manualshive.com logo in svg

Boston Acoustics SPOT, Руководство пользователя

Поделиться
Скачать
Boston Acoustics SPOT Скачать руководство пользователя страница 37

31

R 2.0

V A

OPERA

TION

TUNABLE   

PERCEPTION

Obstacle Avoidance

Helps Spot maintain a minimum distance from obstacles 

•  In normal environments, obstacle avoidance should be kept on
•  In certain environments (such as outdoor areas with tall grass or 

foliage) Spot’s performance may be improved by turning obstacle 
avoidance off

Walk on Grated Floors

Improves Spot’s performance on grated flooring 

•  To be turned on when Spot traverses on grated flooring
•  May also help Spot navigate flooring that has a very repetitive pattern

Ground Height Detection

Helps Spot navigate over obstacles approximately 12” or less in height 

•  In normal environments, ground height detection should be kept on
•  When turned off, Spot is essentially blind, navigating only by contact
•  In certain environments (such as outdoor areas with tall grass or 

foliage) Spot’s performance may be improved by turning ground 
height detection off

Stair/ Surface Edge Avoidance

Keeps Spot from navigating too close to edges 

•  In normal environments, edge avoidance should be kept on
•  In certain environments (such as outdoor areas with tall grass or 

foliage) Spot’s performance may be improved by turning ground 
height detection off

Plan Around Obstacles

Spot allows extra margin around obstacles when using touch to go 

•  In normal environments, edge avoidance should be kept on

Содержание SPOT
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды