7
Connecting the VR965 or VR975
to Stereo or Dolby
®
Pro Logic
®
Systems
For stereo or Dolby Pro Logic systems, the easiest method is to use speaker wire connections as
shown. You may also use the “sub out” connection from your receiver to the input on the speak-
er marked “sub in,” but you will need RCA cables and a Y-connector to split the “sub out” signal
between the two speakers (see illustration on page 8).
Be sure to connect
+
to
+
(red) and
–
to
–
(black).
left
center
right
Subwoofer out
bass/sub
on/standby
sub
in
bass/sub
on/standby
sub
in
965/75 MANUAL 11/99rev1 1/14/00 12:04 PM Page 7
