9
Checking the Speaker Connections
It is important that your speakers are hooked up with similar polarity, or “in phase.” A simple lis-
tening test will tell you if your speakers are connected properly. While listening to music with
your amplifier set to MONO, reverse the speaker wire connections at one speaker only. You’ll
hear a dramatic change in sound. The connection that yields the fuller bass and louder sound is
correct.
Bass/Sub
Control
This control adjusts the amount of deep bass produced by the speakers. Use this control to
increase or decrease the bass level to compensate for the effects of room placement or person-
al taste.
NOTE:
The most musically accurate response will be obtained when the control is in approxi-
mately the 9:00 o’clock position.
bass/sub
on/standby
sub
in
965/75 MANUAL 11/99rev1 1/14/00 12:04 PM Page 9
