BossPac WASP NEST2, Руководство пользователя

Страница: 14 / 26

3.2.2.9 Clearing All Sensors
You can clear all sensors from the NEST’s memory
by choosing CLEAR SENSORS from the System
menu. Once in the SENSOR SETTINGS> CLEAR ALL
screen tap
OK to clear the sensors or CANCEL to go
back to the System screen.
WARNING – CLEARING ALL SENSORS WILL REMOVE
THE SENSORS AND ALL SETTINGS FROM THE NEST’S
MEMORY. BE SURE THIS IS WHAT YOU INTEND TO DO BEFORE CLICKING “OK”
MISE EN GARDE – “CLEAR ALL” D É GAGE LA LISTE DE CAPTEUR ET TOUT LEUR PARAM È TRAGE. SOYEZ SURE AVANT
DE CLIQUER “OK”
3.2.2.10 Adjust Brightness
The adjust brightness option allows you to change
the brightness of the screen to improve the read-
ability of the screen under different lightning
conditions.
*Note: the higher level of brightness will increase
the current consumption.
You can adjust and set the screen brightness by
choosing ADJUST BRIGHTNESS from the SYSTEM
SETTINGS menu. In the ADJUST BRIGHTNESS screen use the UP/DOWN arrows to change the brightness level
and tap DONE to save the level.
3.2.2.11 Reset System Settings
The reset system settings option allows you to
restore the receiver to its default setting. You can
restore the receiver default setting by choosing
RESET SYS SETTINGS from the SYSTEM SETTINGS
menu. Once in the RESET SYS SETTINGS screen tap
on OK to authorize the system setting reset.
2021 14