BossPac WASP NEST2, Руководство пользователя

Страница: 20 / 26

3.2.7.5 Setting Acceleration Warning and Critical Alarm Threshold
To set the desired acceleration warning and crit-
ical alarm thresholds for each individual sensor,
select the desired option from the SENSOR SETTINGS
screen,
HI ACCEL / HI-HI ACCEL / LO ACCEL / LO-LO
ACCEL
The bottom left quadrant of the screen will display
the current setting (in G’s) or DISABLED if there is no
current threshold setting. Select or modify the
desired maximum warning or maximum critical
value by tapping the
UP / DOWN and LEFT / RIGHT arrows. Once the desired value has been selected press OK
to save or CANCEL the editing and return to the SENSOR SETTINGS screen.
3.2.7.6 Setting Velocity Warning and Critical Alarm Thresholds
To set the desired velocity warning and critical
alarm thresholds for each individual sensor, select
the desired option from the SENSOR SETTINGS
screen,
HI VEL / HI-HI VEL / LO VEL / LO-LO VEL
The bottom left quadrant of the screen will display
the current setting (in mm/s) or DISABLED if there is
no current threshold setting. Select or modify the
desired maximum warning or maximum critical
value by tapping the
UP / DOWN and LEFT / RIGHT
arrows. Once the desired value has been selected
press
OK to save or CANCEL the editing and return to the SENSOR SETTINGS screen.
3.2.7.7 Setting Sensor Lost Warning
A warning can be issued to alert that a sensor has
not reported to the NEST Receiver for a pre-deter-
mined timeframe.
To set the amount of elapsed time a sensor can go
without reporting, scroll down to, and highlight the
LOST WARN parameter, and tap SELECT to access
the LOST SENSOR WARNING screen.
The bottom left quadrant of the screen will display
the current setting (in minutes) or 0000 if no setting.
Tap the UP / DOWN and LEFT / RIGHT arrows to set
the desired value and OK to save. Press CANCEL to
cancel the editing and return to the SENSOR
SETTINGS screen.
2021 20