5
ELECTRIC SCREWDRIVERS FOR SELF-CUTTING THREADED INSERTS
3. Screwdriver
32V and 40VDC 035/E/A CESL8 Brushless
Screwdrivers and Controllers - Operation Manual
CAUTION – Please read, understand, and follow all operating and safety instructions in this manual before
using the tools and controllers.
The 035/E/A / CESL8 Series Brushless tools are designed for exclusive use with specific Delta Regis cont-
rollers as defined in this manual. Do not attempt to use the tools and/or controllers with any products other
than as specified in this manual.
3.1 IMPORTANT – INSTALLATION & SAFETY
1. Please read and understand the operation manual and follow all safety and operation instructions
2. Use these products in a suitable dry, indoor location. Do not use tools and controllers in damp, wet or
high temperature environments. Do not use in the presence of flammable liquids or gases.
3. Ensure that the controller has proper ventilation. Do not expose the tools and controllers to areas sub-
ject to airborne contaminants (eg. dust, metal filings).
4. Use only a properly grounded electrical outlet of the correct supply voltage to power the screwdriver
controller.
5. Ensure that the supply outlet is overload protected and of sufficient amperage capacity.
6. Use only the correct plug for the controller and outlet. Hold the plug of the power cord when connecting
or disconnecting. Do not pull on the cable.
7. Do not expose the cable, tool or controller to oil, chemicals, or heat. Ensure that the cable is routed and
used in such a manner as to not be subject to sharp objects that may abrade or cut the cable.
8. Locate the controller in a suitable, safe location on a steady surface. Do not place in a high location
where there may be a risk of it falling. Secure the controller in position to prevent possible movement
caused by pulling on the power or tool cables.
9. Do not cover the controller or stack any objects on top of or near the controller. Ensure that adequate
clearance and ventilation is provided around the perimeter of the controller.
10.Specific models of Delta Regis BECT series controller (035/E/A) are designed for use with 035/E/A /
CESL8 series screwdrivers as specified on the following pages. Use of controller (or screwdriver) with
any other screwdriver (or controller) may result in malfunction, damage, or injury.
WARNING
Failure to understand and follow proper installation guidelines,
safety requirements, andoperating instructions may result
in malfunction, component damage, property damage, shock
hazard, fire hazard, injury or death.
Содержание 035/E32V
