en
Troubleshooting
50
Fault
Cause and troubleshooting
Insufficient cleaning.
4.
Refill the dispenser.
→
"Filling the dispensers", Page 35
Unsuitable detergent added to the dispenser of the in-
telligent dosing system.
1.
Check whether the detergent used is suitable.
→
"Detergents and care products", Page 31
2.
Drain the dispenser.
→
"Cleaning the detergent drawer", Page 36
3.
Clean the dispenser.
4.
Refill the dispenser.
→
"Filling the dispensers", Page 35
Water is leaking out at
the water inlet hose.
Water inlet hose is not correctly/securely connected.
1.
Connect the water supply hose correctly.
→
"Connecting the water inlet hose", Page 15
2.
Tighten the screw connection.
Water is leaking out at
the water outlet hose.
The water outlet hose is damaged.
▶
Replace the damaged water outlet hose.
Water outlet hose is not connected correctly.
▶
Connect the water outlet hose correctly.
→
"Water outlet connection types", Page 16
Fluff on the laundry.
Fluff has accumulated in the drum.
▶
Run the
筒洗烘
programme without any laundry
or detergent.
Water inlet noise dur-
ing the drying phase.
Drying phase requires water.
1.
Not a fault.
2.
Make sure that the water tap also remains open
during the drying phase.
Drying programme
does not start.
Door is not closed.
1.
Close the door.
2.
Press
开始
/
添衣
to start the programme.
No drying programme is selected.
▶
Select a suitable drying programme.
→
The laundry is too
damp.
Unsuitable programme for the type of fabric.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other
appliances are working.
The load is too large.
After the end of the programme, warm laundry feels
damper than it actually is.