en
operation
30
The manufacturer's instructions for
use and dosage can be found on the
packaging.
Notes
¡
Only use liquid detergents that are
self-flowing
¡
Do not mix different liquid deter-
gents
¡
Do not mix detergent and fabric
softener
¡
Do not use products that have ex-
pired or are highly congealed
¡
Do not use products containing
solvents, caustic agents or volatile
substances (e.g. bleach)
¡
Use dyes sparingly as salt may
damage stainless steel
¡
Do not use bleaching agents in the
appliance
operation
13 Basic operation
operation
Note:
You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on www.bosch-
home.com.
13.1 Switching on the appli-
ance
Requirement:
The appliance has
been correctly installed and connec-
ted.
→
"Installation and connection",
▶
Turn the programme selector to a
programme.
Note:
The lighting for the drum goes
out automatically.
13.2 Setting a programme
1.
Turn the programme selector and
set the required programme.
→
2.
If necessary, adjust the pro-
gramme settings.
13.3 Adjusting the pro-
gramme settings
Requirement:
A programme has
been set.
→
"Setting a programme", Page 30
▶
Adjust the programme settings.
→
Note:
The programme settings are
not saved permanently for the pro-
gramme.
13.4 Loading laundry
Note:
To prevent creasing, take note
of the maximum load for the
→
.
Requirement:
The laundry is pre-
pared.
→
1.
Open the door.
Make sure that the drum is empty.
2.
Place the laundry in the drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
13.5 Adding detergent and
care product
Note:
Observe the information about
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.