first time
en
19
first time
6 Before using for the
first time
first time
Prepare the appliance for use.
6.1 Starting an empty wash-
ing cycle
Your appliance was inspected thor-
oughly before leaving the factory. To
remove any residual water, run the
first wash cycle without any laundry.
1.
Turn the programme selector to
Drum Care
.
2.
Close the door.
3.
Pull out the detergent drawer.
4.
Pour standard washing powder
into compartment II.
To prevent foaming, use only half
of the amount of detergent recom-
mended by the detergent manufac-
turer for light soiling. Do not use
detergent suitable for woollens or
delicates.
5.
Push in the detergent drawer.
6.
Press
Start / Reload
to start the
programme.
a
The display shows the remaining
programme duration.
a
After the programme has ended,
the display shows: End.
7.
Start the first wash cycle or set the
programme selector to
Off
to
switch off the appliance.
→
