en
Additional programme settings
26
ñ
Finished in
ñ
Finished in
Before starting the program
, you can
preselect the program end ("Ready in"
time) in hourly increments (h = hour) up
to a maximum of 24 hours.
To do this:
1.
Select a program.
The program duration is displayed
for the selected program, e.g.
2:30
(hours:minutes).
2.
Press the
ñ
Finished in
button
repeatedly until the required number
of hours is displayed.
3.
Press the
A
Start/Reload button.
The door will be locked.
The selected number of hours (e.g.
8
h
) is shown in the display panel and
counts down until the wash program
starts. The duration of the program is
then displayed.
During the timer count-down
, you can
change the preselected number of
hours as follows:
1.
Press the
A
Start/Reload button.
2.
Use the
ñ
Finished in
button to
change the number of hours.
3.
Press the
A
Start/Reload button.
During the timer count-down
, you can
add or remove laundry as required:
1.
Press the
A
Start/Reload button.
2.
Open the door and add or remove
laundry.
3.
Close the door.
4.
Press the
A
Start/Reload button.
Note:
The length of the program is
automatically adjusted when the
program is running.
Certain factors can affect the program
length, e.g.:
■
Program settings,
■
Detergent dosage (additional rinse
cycles if required due to foaming),
■
Load size/type of textiles (longer
washing for higher load and for
textiles which absorb more water),
■
Imbalances (e. g. due to fitted
sheets) are offset with several start-
ups of spin cycles,
■
Fluctuations in power supply,
■
Water pressure (infeeding speed).
\
Additional programme
settings
Additional programme settings
Note:
You can find possible additional
programme settings in the overview;
these differ depending on the model.
G
Speed/
F
Eco
G
Speed/
F
Eco
Button with two possible settings for
adapting the selected program:
■
G
Speed
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more
energy than, the selected program,
without the
G
Speed/
F
Eco
setting.
Note:
Do not exceed the maximum
load.
■
F
Eco
Energy-optimised washing by
reducing the temperature while
achieving a washing result that is
consistent with the selected
program, without the
G
Speed/
F
Eco setting.
Press the button to do this. First of all,
you can select the
G
Speed
setting. If
you press the button again, the
F
Eco
setting is active. The respective symbol
is shown in the display when the setting
is activated.
If you press the button again, no setting
is active.
