Setting the signal
en
31
Programme end during rinse
hold
0
- - - - appears in the display panel and
the indicator lamp of the
A
Start/
Reload button flashes.
Continue the program by:
■
Pressing the
A
Start/Reload button
(the laundry will be drained with the
default spin speed setting*) or
■
Selecting a spin speed or set the
program selector to
0
Spin
and then
pressing the
A
Start/Reload button.
* depending on the chosen program ->
Overview of programmes
Programme end
End
appears in the display panel and
the indicator lamp of the
A
Start/
Reload button is off.
Removing laundry/switching
off the appliance
1.
Open the washing machine door
and remove the laundry.
2.
Turn the programme selector to
Ú
Off
. Appliance is switched off.
3.
Turn off the tap.
Not required for Aqua-Stop models.
Contents of package
Notes
– Do not leave any items of laundry
in the drum. They may shrink in
the next wash or discolour
another item.
– Remove any foreign objects from
the drum and the rubber seal –
risk of rusting.
– Leave the washing machine door
and detergent drawer open so
that any residual water can dry
away.
– Always remove the washing.
– Always wait until the programme
ends, as the appliance could still
be locked. Switch the appliance
on and wait for the unlocking
device.
– If at the end of the programme
the display has gone out, the
energy saving mode is active. To
activate, select any button.
M
Setting the signal
Setting the signal
You can change the following settings:
■
The volume for the information
signals (e.g. at the end of the
program) and/or
■
The volume of the audible button
signals.
You will need to activate the setting
mode in order to change these settings.
Activate setting mode:
1.
Set the program selector to
position 1. The washing machine is
switched on.
2.
Press the
A
Start/Reload button
and, at the same time, turn the
program selector clockwise to
position 2.Release the button.
1/2/3/...
positions on the program
selector
