en
Intelligent dosing system
50
¡
If you are using the intelligent dos-
ing system, do not add additional
detergent or fabric softener into
the compartment for manual dos-
ing.
→
If you want to dose manually for a
set programme, observe the
following information:
–
Deactivate the intelligent dosing
system before starting the pro-
gramme. The selected settings
are retained even after the appli-
ance has been switched off.
→
–
Pour detergent or fabric softener
into the compartment for manual
dosing.
→
–
Activate the intelligent dosing
system once the programme
has ended.
→
Requirements
¡
The laundry is prepared.
→
"Preparing the laundry", Page 43
¡
The laundry is sorted.
→
¡
The laundry is placed in the appli-
ance.
→
¡
The programme is set.
→
"Setting a programme", Page 46
¡
The intelligent dosing system is ac-
tivated.
→
1.
To replace the contents of the dis-
penser with another product, clean
the detergent drawer →
2.
If required, adjust the contents of
the dispenser →
3.
If required, adjust the basic
dosage →
.
4.
If required, adjust the programme
settings →
5.
.
6.
The
→
.
15.2 Filling the dispensers
If you want to use the intelligent dos-
ing system or if the appliance dis-
plays a message during operation of
the appliance, fill the dispensers.
Notes
¡
Observe the information on safety
→
.
¡
Fill the dispensers only with suit-
able detergent and care products.
If you want to add more liquid de-
tergent or fabric softener in the dis-
penser, use the same product.
If you want to replace the liquid de-
tergent or fabric softener in the dis-
penser with another product, clean
the detergent drawer beforehand.
→
"Cleaning the detergent drawer",
Requirement:
, or flashes.
1.
Pull out the detergent drawer.
2.
Open the dispenser cover.