Bosch WAX28EH0BY, Руководство пользователя и инструкции по установке

Страница: 47 / 80

Basic operation
en
47
13.3 Adjusting the pro-
gramme settings
Requirement:
A programme has
been set.
→
"Setting a programme", Page 46
▶
Adjust the programme settings.
→
"Buttons", Page 25
Observe the information about op-
erating logic →
Page 19 .
Notes
¡
The programme settings are not
saved permanently for the pro-
gramme.
¡
The setting is saved if you activate
or deactivate the intelligent dosing
system.
Adjusting additional programme
settings
1.
Press
Options
to call up addi-
tional programme settings.
2.
Select the programme settings.
3.
Press
Options
to call up the
main menu.
13.4 Saving the programme
settings
1.
Set the ⁠
Memory
programme.
2.
Press ⁠ to call up the sub-menu.
3.
Select a programme.
4.
Press
Main menu
to call up the
main menu.
5.
Adjust the programme settings if
required.
a
The programme is saved.
13.5 Loading laundry
Notes
¡
Please read the information in the
Safety →
Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡
To prevent creasing, take note of
the maximum load for the
→
"Programmes", Page 29 .
Requirement:
The laundry is pre-
pared and sorted.
→
"Laundry", Page 43
1.
Open the door.
Make sure that the drum is empty.
2.
Load the laundry unfolded into the
drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
13.6 Adding detergent and
care product
For programmes in which intelligent
dosing is not possible or desirable,
you can add detergent manually.
Notes
¡
Observe the information on safety
→
Page 4 and preventing material
damage → Page 10 .
¡
The dosing recommendation is
aimed at the maximum load for the
programme.
Tip:
In addition to intelligent dosing,
you can also add additional care
product for laundry, e.g. stain re-
mover, starch or bleach, to the
manual dosing compartment. Do not