Operating the appliance
en
31
1
Operating the
appliance
Operating the appliance
Preparing the appliance
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Drum Clean
programme.
"Before washing for the first time"
Notes
■
Never switch on a damaged
appliance!
■
Inform customer service!
1.
Insert mains plug.
:
Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
2.
Turn the water tap on.
3.
Open the appliance door.
Switching on the appliance/
selecting a programme
Press the
#
button till the indicator
lamp lights up, release the button. The
appliance is switched on.
The
Cotton
programme, which is preset
at the factory, is then always displayed.
You can use this programme or select a
different programme.
Note:
If you have activated the
childproof lock, you must deactivate it
before you can set a programme.
Presettings and maximum load are
indicated on the Touch-Display for the
selected programme.
You can use the displayed presettings
or adjust the selected programme
optimally to the items of washing by
changing the
and/or selecting
"Additional programme settings"
Changing the programme
default settings
You can use the default settings or
change them.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed.
They are not saved when the appliance
is switched off.
Programme default settings
Overview of programmes
~
Supplementary sheet for the installation
and operating instructions.
Содержание WAU28640TC
Страница 51: ...6 ...