en
Operating the appliance
32
Selecting the additional
programme settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the
programme progress.
The indicator lamp for the button lights
up if a setting is activated.
The settings are not saved when the
appliance is switched off.
Additional programme settings
Overview of programmes
~
Supplementary sheet for the installation
and operating instructions.
Placing laundry into the drum
Insert the laundry.
Close the door.
Notes
■
Unfold and load presorted items
of laundry. Mix large and small
items. Washing items of different
size distribute themselves better
during the spin cycle. Individual
items of washing may cause
an unbalanced load.
■
Observe the maximum specified
load. Overfilling adversely affects the
washing result and promotes
creasing. Make sure that no items of
laundry are trapped between the
door and the rubber seal, and close
the door.
Measuring and adding
detergent and care products
For the majority of programmes on your
appliance, detergent and fabric softener
are dosed automatically; it is a factory
setting for these programmes and can
be changed.
In addition to intelligent dosing, you can
add cleaning aids (e.g. softener, bleach
or stain remover) to the left-hand
compartment , if necessary.
For programmes without intelligent
dosing, or as required (in which case,
set intelligent dosing to "off"), detergent
can be added manually to the left-hand
compartment.
Starting the programme
Touch and hold
A
button for 1~2
seconds, then release the button. The
programme starts and the appliance
door is locked.
The
Finish in
time is shown in the
Touch-Display and counts down until
the programme starts. After the
programme has started, the programme
duration is displayed. And the displays
for the programme's progress light up.
Содержание WAU28640TC
Страница 51: ...6 ...