Bosch WAU28540TC, Инструкция по эксплуатации и руководство по установке

Страница: 30 / 48

en
Additional programme settings
30
稢伩
(Prewash)
Prewash for heavily soiled laundry.
Touch
稢伩
(Prewash)
to activate or
deactivate it.
Note:
Put the detergent into dispenser
I
and
II
.
糪乆ㅟ
(Water plus)
Increased water level for gentler
treatment of the laundry.
Touch
糪乆ㅟ
(Water plus)
to activate
or deactivate it.
硄壌
(Easy iron)
Reduces creasing by means of a
special spin sequence followed by
fluffing and reduced spin speed.
Touch
硄壌
(Easy iron)
and activate or
deactivate it.
Note:
If
硄壌
(Easy iron)
has been
activated, the laundry will have retained
a higher than average level of moisture
after spinning.
侊仳
(Soaking)
Before the main wash cycle starts, the
washing remains for longer in the water
to partially dissolve intensive soiling.
Notes
■
Put detergent in dispenser
I
and
II
before starting the appliance.
■
Load laundry of the same colour.
伩倗
(Rinse plus)
Settings that can be selected:
Additional rinse cycles for particularly
sensitive skin and/or for areas with very
soft water.
Longer programme duration.
The number of rinse cycles that the
appliance actually runs depends on the
number that is set as a basic setting for
the programme in question.
䤒䌭
(Memory)
You can save a selected programme
with your favourite settings here.
To store
:
1.
Switch on the appliance.
2.
Select a programme.
3.
If required, change the programme
default settings and/or select
programme additional settings.
4.
Touch and hold
䤒䌭
(Memory)
button for approx. three seconds.
The programme is saved if all of the
settings flash briefly.
Calling up
: touch
䤒䌭
(Memory)
button briefly after you switch on the
appliance.
Reset : touch and hold
䤒䌭
(Memory)
button again for approx. three seconds
after selecting the new programme and
settings.
10’ 10 minutes
20’ 20 minutes
30’ 30 minutes
+1
+ 1 rinse cycle
+2
+ 2 rinse cycles
+3
+ 3 rinse cycles