en
Operating the appliance
34
Measuring aid A* for liquid detergent
*depending on the model
Position the measuring aid A for
measuring the correct amount of liquid
detergent:
1.
Pull out the detergent drawer. Press
down the insert and fully remove the
drawer.
2.
Slide the measuring aid forwards,
fold it down and click it into place.
3.
Reinsert the drawer.
Note:
Do not use the measuring aid for
gel detergents and washing powder, or
for programmes with pretreat or when
"Finish in" time is selected.
For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Starting the programme
Touch and hold
A
button for 1~2
seconds, then release the button. The
programme starts and the appliance
door is locked.
The
Finish in
time is shown in the
Touch-Display and counts down until
the programme starts. After the
programme has started, the programme
duration is displayed. And the displays
for the programme's progress light up.
Note:
Foam detection
If the symbol
Å
also lights up in the
Touch-Display, the appliance has
detected too much foam during the
wash cycle and automatically activated
additional rinse cycles to remove the
foam.
If you want to lock the programme to
prevent it from being adjusted
inadvertently, you can select the
childproof lock.
Childproof lock
You can lock the appliance to prevent
the functions you have set from being
changed inadvertently. To do this,
activate the childproof lock.
Touch and hold the
E
(3
寤
)
button to
activate/deactivate
the childproof lock.
To activate the childproof lock:
After the programme starts, Touch and
hold the
E
(3
寤
)
button for 3 seconds.
■
E
(3
寤
)
lights up: The childproof lock
is activated.
■
E
(3
寤
)
flashes: If a button is
touched while childproof lock is
activated, the
E
(3
寤
)
button will
flash.
Содержание WAU28540TC
Страница 47: ...6 ...
