Setting the signal
en
31
M
Setting the signal
Setting the signal
You can change the following settings:
■
The volume of the notification signals
(e.g. at the end of the programme)
and
■
The volume of the button signals.
You will need to activate setting mode
before you can change these settings.
Activating setting mode
1.
Set the programme selector to the
Cottons
programme at position 1.
The washing machine is switched
on.
2.
Press the Start button while turning
the programme selector clockwise to
position 2. Release the button.
Setting mode is activated and the preset
volume for the notification signals (e.g.
at the end of the programme) appears
in the display panel.
Changing settings
You can change the following settings
by pressing the
Ready in
button when
the programme selector is at these
positions:
■
2
: The volume of the notification
signals
and/or
■
3
: The volume of the button signals.
Exiting setting mode
You can now exit setting mode by
turning the programme selector to the
Off
position. The settings are saved.
2
Cleaning and
maintenance
Cleaning and maintenance
:
Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
Switch off the appliance and pull out the
mains plug.
:
Warning
Risk of poisoning!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
Damage to the appliance
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
machine.
Do not use cleaning agents that contain
solvents.
Prevent detergent residue from
building up and odours from forming
by following these instructions:
Notes
■
Ensure the room in which the
washing machine is set up is well
ventilated.
■
Leave the door and detergent
dispenser tray open slightly when
the washing machine is not in use.
■
Occasionally run a wash using the
Cottons 60 °C
programme and
powder detergent.
0 = off,
1 = quiet,
2 = medium,
3 = loud,
4 = very loud
