Operating the appliance
en
29
Childlock
(
E
3 sec.)
You can lock the washing machine to
prevent the functions you have set from
being changed inadvertently. To do this,
activate the childproof lock when the
program has started.
To
activate/deactivate
, press and hold
the
Spin speed
and
Ready in
buttons at
the same time for approx. three
seconds.The
E
symbol appears in the
display panel.
■
E
lights up: The childproof lock is
active.
■
E
flashes: The childproof lock is
active and the program selector has
been adjusted.To deactivate the
childproof lock, reset the program
selector to the initial program. The
symbol lights up again.
Note:
To avoid the program to
terminate, do not turn the program
selector beyond the Off position.
Note:
The childproof lock remains
active after the program has ended and
the appliance is switched off. You must
always deactivate the childproof lock if
you want to start a new program.
Adding laundry
Following the start of the program, you
can add or remove laundry as required.
Press the Start button to do this.
The Start button indicator lamp flashes
and the machine checks whether it is
possible to add laundry.
If the following appears in the display
panel:
■
the
Õ
symbol disappears, and
adding is possible.
■
the
Õ
symbol lights up, it is not
possible to add laundry.
To continue the program, press the
button Start.The program continues
automatically.
Notes
■
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
■
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
■
The load display is not active during
reloading.
Changing the programme
1.
Press the Start button.
2.
Select another program.
3.
Press the Start button.The new
program starts from the beginning.
Cancel the programme
For programs at high temperature:
1.
Press the Start button.
2.
To cool down laundry: Select
Rinse
.
3.
Press the Start button.
For programs at low temperature:
1.
Press the Start button.
2.
Select
Spin
.
3.
Press the Start button.
Programme end during rinse
hold
- - - appears in the display panel and
the indicator lamp of the Start button
flashes.
Continue the program by:
■
Pressing the Start button or
■
Selecting a spin speed or setting the
program selector to
Spin
and then
pressing the Start button.
