21
Start in time
Before a programme starts, you can specify by how
many hours the start of the programme is to be
delayed.
Turn the programme selector to desired programme.
“
wash
/
ready
”
control light flashes. LED dsplay shows
the
remaining time
■
Press the “
3
” button. The LED shows “
”
(
=hour).
■
Press the “
3
” button again to select the desired
start in time.
²
The start in time can be set in 1-hour steps. The
maximum start in time can be set to 24 hours. If a
start in time of 24h has been set, the “
” can be
accessed by pressing the “
3
” button again.
²
The start in time start working after pressing the-
Start Soaking
A
button. The cursor between
number and
flashes until the start in time
elapses and the programme starts.
²
The start in time is counted down by hour. When the
start in time has elapsed, the programme starts
automatically and the remaining time is displayed.
²
The start in time can be changed at any time before
the programme starts.Press the “
3
” button until the
required time appears.The selected programme will
not be changed.
²
If the programme was changed, the start in time was
terminated also. The LED will displays remaining
time. If required, reset the start in time.
²
You can add/remove laundry during the period of
start in timeworks. Close the loading door
immediatelly after finishing loading/removing.
