20
Remaining time
When the programme has been selected, the expected
programme duration is displayed.
■
Turn the programme selector to desired
programme.
“
wash
/
ready
”
control light flashes.
LED dsplay shows the remaining time, e.g. 1:18= 1
hours and 18 minutes.
■
When the programme has ended, it display
"
›
"
If
Rinse hold
was selected, it displays
"
˜
"
after the
programme ends.
²
While the programme is running, the programme
duration may be extended or reduced for the follow-
ing reasons.
Reductions in time
occur because of:
– small loads,
– reduced heating times,e.g. if the water is hot.
Increases in time
occur because of:
– additional rinse cycle if excessive foam is in the
laundry,
– multiple spinning if the laundry is distributed poorly
in the drum,
– increased heating times,e.g. when the water is too
cold,
– water pressure too low,
– selection of an additional option,e.g.
Rinse Plus
O
function after the programme has startd,
– very absorbent washing extends the heating
duration.
