Faults and what to do about them.
en
31
3
Faults and what to do
about them.
Faults and what to do about them.
Emergency release
E.g. in the event of a power cut
The programme continues when the
power supply is restored.
However, if the laundry has to be
removed, the washing machine door
can be opened as follows:
:
Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of scalding
if you come into contact with hot
detergent solution and laundry.
If possible, leave it to cool down first.
:
Warning
Risk of injury!
Reaching into the drum while it is still
turning may cause hand injuries.
Do not reach into the drum when it is
turning.
Wait until the drum has stopped turning.
Caution!
Water damage
Any escaping water may cause water
damage.
Do not open the washing machine door
if water can be seen through the glass.
1.
Switch off the appliance. Pull out the
mains plug.
2.
Drain the detergent solution
3.
Use a tool to pull the emergency
release downwards and then
release.
The washing machine door can then
be opened.
Information about the indicator lights
Indicator/symbol
Cause/remedy
The
'
Rinse
and
N
Wash
status indi-
cators are flashing
Close the washing machine door properly; washing may be trapped.
The
0
Spin
and
N
Wash
status indi-
cators are flashing
■
Turn the tap on fully,
■
The supply hose is kinked/trapped,
■
The water pressure is too low. Clean the filter
The
0
Spin
and
'
Rinse
status indi-
cators are flashing
■
The drain pump is blocked. Clean the drain pump
■
The drain hose/drain pipe is blocked. Clean the drain hose at the siphon
The
'
Rinse
status
indicator is flashing
Motor fault. Call the after-sales service.
All the status indica-
tors are flashing
Turn off the tap.Call the after-sales service.
Содержание WAE20067ES
Страница 1: ...en Instruction Manual and Installation Instructions Washing machine ...
Страница 35: ...6 ...