background image

Operating the appliance       

en

15

Filling

:

Warning

Eye/skin irritation!

Detergent and care products may spray 

out if the detergent drawer is opened 

while the machine is in operation.

Open the drawer carefully.

Rinse eyes or skin thoroughly if they 

come into contact with detergent/care 

products.

If swallowed accidentally, seek medical 

advice.

Note:  

Dilute viscous fabric softener and 

fabric conditioner with water; this 

prevents blockages.

Pour the detergent and care products 

into the appropriate compartments:

1.

Pull out the detergent drawer as far 

as possible.

2.

Add detergent and/or care products.

3.

Close the detergent drawer.

Measuring aid* for liquid detergent

*Depending on the model

Position the measuring aid for 

measuring liquid detergent:

1.

Pull out the detergent drawer. Press 

down the insert and fully remove the 

drawer.

2.

Slide the measuring aid forwards, 

fold it down and click it into place.

3.

Reinsert the drawer.

Note:  

Do not use the measuring aid for 

gel detergents and washing powder, or 

for programmes with prewash or when 

the Ready in time is selected.

For models without a measuring aid

pour the liquid detergent into the 

appropriate dispenser and place it in 

the drum.

Start the programme

Press the Start button to start the 

programme.
During the programme, the display 

panel shows the Ready in time or, after 

starting the wash programme, the 

programme duration and the symbols 

for the programme progress. 

Display panel 

~

 Page 8

.

Note:  

To secure the programme 

against being inadvertently adjusted, 

select the childproof lock.

Measuring aid* 

A

For liquid detergent

Compartment 

II

Detergent for the main wash, 

water softener, bleach, stain 

remover

Compartment 

i

Softener, starch, 

do not exceed the maximum

Compartment 

I

Detergent for prewash

Содержание WA SERIES

































Отзывы: