background image

en

    Operating the appliance

14

Placing laundry into the drum

:

Warning

Risk of death!

Items of laundry pretreated with 

cleaning agents that contain solvents, 

e.g. stain remover/cleaning solvent, 

may cause an explosion after being 

loaded into the washing machine.

Hand-rinse these items of laundry 

thoroughly beforehand.

Notes

Mix items of laundry of varying sizes. 

Laundry items of different sizes 

distribute themselves better during 

the spin cycle. Individual items of 

laundry may lead to imbalances. 

Observe the maximum specified 

load. Overfilling has a negative 

impact on the washing result and 

promotes creasing.

1.

Unfold presorted items of laundry 

before placing them in the washing 

drum.

2.

Make sure that no items of laundry 

are trapped between the washing 

machine door and the rubber seal, 

and close the door.

Measure and add detergent 

and care products

Caution!

Damage to the appliance

Cleaning agents and agents for 

pretreating laundry (e.g. stain removers, 

prewash sprays, etc.) may cause 

damage if they come into contact with 

the surfaces of the washing machine. 

Do not allow these agents to come into 

contact with the surfaces of the washing 

machine. If necessary, immediately wipe 

away spray residue and other residues/

droplets with a damp cloth.

Measuring

Dose the detergents and care products 

according to:

Water hardness. Ask your water 

supply company.

The manufacturer’s specifications on 

the packaging.

The amount of laundry.

Soiling 

~

 Page 9

.

Содержание WA SERIES

































Отзывы: