– 4 –
A1 February 03/Trb
1
Introduction
English
This is a high-quality single-channel video movement sensor for direct
integration in an analog CCTV system.
Video signals are evaluated through image analysis and interpretation.
Alarm, pre-alarm and post-alarm images are stored.
Additional information on project planning and the software tool can be
obtained in electronic form through a dealer or installer.
Statutes/Norms/Guidelines met by the unit
– EMV law on the basis of
DIN EN 50081–1 (radiated noise)
DIN EN 50130–4 (noise immunity)
– DIN EN 60950 (electrical safety)
– Environment to IEC 68–2–2/Degree I, 68–2–1, 68–2–30
The product carries the CE symbol.
Registration: FCC
Registration: Recognition Component Mark for Canada and the United States
(File number: E221534)
Basic shipment contents
Accessories
– Basic device (VMD01–M50/M60)
– Power supply VMD–PS
– Operating instructions
– Wall holder VMD–WM
– 15-pin Sub–D plug
– Mouse VMD–SM
– Flat box with rubber feet and
– 19” frame incl. mounting
brackets
VMD–RA90
– 19”frame incl. mounting brackets
without power supply/cable set/
Distributor LP, with blind plate
VMD–RA00
– 19” blind plate VMD–RADC
Camera, monitor, recorder, mouse (for programming) and cabling are not part
of the shipment contents.
Alarm contact
Only for programming
