Bosch VJD-3000, Руководство по установке

Страница: 25 / 34

Processor load
If the unit is accessed via the Web browser, you will see the processor load indicator bar in
the top right of the window next to the information icon .
You can obtain additional information to help you when troubleshooting or fine tuning the
unit. The values indicate the proportions of the individual functions on the coder load, shown
as percentages.
4
Move the cursor over the graphic indicator. Some additional numerical values are also
displayed.
Network connections
You can display information about the network connection. To do this, move the cursor over
.
Link Ethernet link type
UL Uplink, speed of the outgoing data traffic
DL Downlink, speed of the incoming data traffic
Terminal block
The terminal block has several contacts for:
–
Serial data transmission
– 4 alarm inputs
– 1 relay output
Pin assignment serial interface
Options for using the serial interface include transferring transparent data, controlling
connected units or operating the unit with a terminal program.
The serial interface supports the RS-232, RS-422 and RS-485 transmission standards. The
mode used depends on the current configuration.
The pin assignment of the serial interface depends on the interface mode used:
Contact RS-232 mode RS-422 mode RS-485 mode
CTS — RxD- (receive data minus) —
TXD TxD (transmit data) TxD- (transmit data minus) Data-
RTS — TxD+ (transmit data plus) Data+
RXD RxD (receive data) RxD+ (receive data plus) —
GND GND (ground) — —
7.4
7.5
7.6
VIDEOJET decoder 3000 Troubleshooting | en 25
Bosch Sicherheitssysteme GmbH Installation Manual 2013.08 | V3 | F.01U.281.923