Bosch TTM 2104, Оригинальное руководство пользователя

Страница: 56 / 506

1 691 206 005 2019-02-25
|
Robert Bosch GmbH
56 | TTM 2104 / TTM 2204 | Vehicle data en |
9.2 Copying measurement results
In the "Test protocol" view, vehicle data can be linked
to a measurement results to the "Connected Repair" or
the "Entrance Check" service.
No. Screen
element
Description
1 Button
"CoRe"
Data transfer to "Connected Repair"
2 Button
"Entrance
Check"
Data transfer to "Entrance Check"
9.2.1 Transferring data to "Repair Workshop"
¶
Select button for transfer (no. 1).
i
The button is only active if the data has been saved
in the "Test protocol" view.
"
The data is transferred to "Connected Repair". If the
transfer has been successful, a green checkmark
appears. In case of errors, a red exclamation mark,
and an error message, if applicable, appears.
9.2.2 Transferring data to "Entrance Check"
¶
Select button for transfer (no. 2).
i
The button is only active if the data has been saved
in the "Test protocol" view.
"
The data is transferred to "Entrance Check". If the
transfer has been successful, a green checkmark
appears. In case of errors, a red exclamation mark,
and an error message, if applicable, appears.