Bosch TSTBT4H2CP-M--A, Руководство пользователя

Страница: 14 / 24

6 720 220 380 Subject to change without prior notice Revised 06-13
14 TSTBT4H2CP SERIES
period has two set points, one for Cooling Mode and one
for Heating Mode.
1. From the thermostat home screen, press menu twice
or “Schedule” to enter the Programming Setup Menu.
2. morn is the first time period displayed.
3. Use the

or

button to adjust the start time for
the current time period. The time duration is in 15
minute intervals.
4. Push neXT.
5. Set the set point for the Heating mode using the

or

button. You will see “Heat” beneath the set
point temperature.
6. Push neXT.
7. Set the set point for the Cooling mode using the

or

button. You will see “Cool” beneath the set point
temperature.
8. Push neXT.
9. The next time period is now displayed.
10. Repeat steps 3-8 to establish the start time for that
time period and the heating and cooling set points for
that time period.
11. Push neXT.
The current screen at this point is used to assign the
current schedule being established to specific days.
7 day ProGram sChedule
(ConTinued from sChedule
ProGramminG)
The time schedule and set points have been determined,
but they have not been assigned to specific day at this
point.
The default setting for the TSTBT4H2CP Thermostat
Series is a 7 Day Schedule. All 7 days are displayed. All 7
days will utilize the schedule just created if no changes
are made at this point.
12. Press enTer to apply the schedule just created to all
7 days of the week.
CusTom ProGram sChedule
(ConTinued from sChedule
ProGramminG)
Some days may require a different schedule program;
whether it be a different time period definition or different
heating / cooling set points. To create specific schedules
for specific days, continue from the Schedule
Programming Steps 1-11 from above and continue with the
following instructions. Each day can have its own unique
programmed schedule and set points; for a total of 7
possible unique schedules for the TSTBT4H2CP
Thermostat Series.
The decision to be made here is what days the scheduled
program will be assigned to; this is accomplished by
removing the days that the program will not be associated
with. The remaining days being displayed are the days that
the current schedule will be assigned to.
Picking up after step 11 from above:
Currently all 7 days are being displayed and an “01” is
displayed in the u day. By pressing the

or

button,
you will see “Mon” appear or disappear. This is how you
add or remove Monday from the current schedule
program. The

button adds “Mon” to the list of days
affected, the

button removes “Mon” from the list of
days affected.
Creating a 5+2 Schedule Example (Weekday Sc
Weekend Schedule):
13. Press the neXT button until “06” is displayed in the
upper right hand corner (Day 6 which is Saturday).
14. Press the

button to remove “Sat” from the days
being displayed.
15. Press the neXT button to change the day number to
“07” (Day 7 is Sunday).
16. Press the

button to remove “Sun” from the days
being displayed.
17. Currently you should only see Mon, Tue, Wed, Thu, Fri
being displayed. Press enTer button.
You should now be back to the thermostat home screen
and the schedule that was just created has been applied
to Mon-Fri.
18. Repeat Steps 1-11 from above establishing times and
set points to apply for the weekend (Sat & Sun).
19. All days should be displayed and “01” should be in the
upper right hand corner. Press the

button to
remove “Mon” from the days being displayed.
20. Press the neXT button to change the day number to
“02” (Day 2 is Tuesday).
21. Press the

button to remove “Tue” from the days
being displayed.
7 day Program schedule