Bosch TCA 58 series, Руководство оператора

Страница: 19 / 108

15
TCA58 06/2008
en
Note: If no button is pressed within 90
seconds, the appliance switches to stand­
by mode without saving the new settings.
In this case, the previous water hardness
setting is retained.
The first time a filter is used or after
changing the filter, the appliance needs to
be cleaned.
Fill the water tank with water.
Place a suitable container (at least 0.5
litres) under the foaming nozzle 9 .
Turn the dial 8 to
g
/
h
.
Allow about 0.5 litres of water to run
through.
Turn the dial back to
●
.
Setting the temperature
It is possible to set three different coffee
temperatures.
Switch the appliance to stand­by.
Hold down the
4
+
5
buttons
simultaneously for at least 5 seconds.
4
on = Low temperature
4
+
5
on = Medium temperature
4
+
5
+
a
on = High temperature
Press the
4
button to set the required
temperature.
Press the
a
button to save the setting.
i
The factory setting is the medium
temperature.
Energy­saving mode
The appliance can be programmed so that
it automatically switches to stand­by mode
after a certain time (from 1 to 4 hours).
Switch the appliance to stand­by.
Hold down the
5
button for at least
5 seconds.
4
on = Switches off after 0.5 hours
4
+
5
on = Switches off after 1 hour
4
+
5
+
a
on
= Switches off after 2 hours
4
+
5
+
a
+
h
on
= Switches off after 4 hours
●
●
●
●
●
●
●
●
●
●
●
Press the
5
button to set the required
time.
Press the
a
button to save the setting.
i
The factory setting is 1 hour.
Reset
The settings for water hardness, tempera­
ture and energy­saving mode can be reset
to the factory settings simultaneously.
Switch appliance to stand­by mode and
pull out trays 1 and .
Hold down the
4
and
h
buttons simulta­
neously for at least 5 seconds. The LEDs
flash briefly to confirm the reset.
Insert trays 1 and again, the
appliance switches to stand­by mode.
Adjusting the grinding unit
Sliding switch
17
adjusts the degree of
grinding, from coarse to fine.
Warning
Adjust the grinding unit only while it is
running! Otherwise the appliance may be
damaged.
● Press the coffee dispensing button
4
.
● While the grinding unit is running, move
the sliding switch 17 to the desired
position: the smaller the dots, the finer the
grind.
i
The new setting will not become apparent
until the second or third cup is brewed.
Tip: For dark roast coffee beans, choose a
coarser grind; for light roast beans, select a
finer grind.
Float
The float 3 in the water tray shows
when the tray needs emptying.
● If the float 3 is clearly visible, empty the
water tray .
●
●
●
●
●