aus
Fault, what to do?
26
A different error code is
indicated on the digital
display.
(
“
:
‹‚
to
“
:
„‹
)
A technical fault has probably
occurred.
Switch off appliances with the ON/OFF
switch
(
. After a short time restart
the appliance.
If the problem recurs, turn off the tap and
pull out the mains plug.
Call customer service and mention the error
code.
Display flashes
Door not closed properly.
Close the door. Ensure that no objects
(utensil, fragrance dispenser) are protruding
over the basket and preventing the door
from closing.
Refill indicator for rinse-aid
@
is lit.
No rinse aid.
Refill rinse aid.
Refill indicator for rinse-aid
@
is not lit.
Refill indicator switched off.
Activation/deactivation (see chapter Rinse
aid).
There is still enough rinse aid
available.
Check refill indicator, level.
Water is left
in the appliance at the end
of the programme.
Filter system or area under
the filters
1R
is blocked.
Clean filters and area underneath (see
Waste water pump).
The programme has not yet
ended.
Wait until programme ends or reset (see
Terminating the programme).
Fault
Cause
Remedial action