Solution 144
28
Bosch Security Systems 10/12 BLCC600R
Quick Start Guide
Access > Fingerprint >
Add Fingerprint
MENU 1-8-0
Access > Fingerprint >
Delete Fingerprint
MENU 1-8-1
Access > Fingerprint >
Fingerprint Status
MENU 1-8-2
Area Programming
By default the control panel is configured for one area.
Examples given in this document are for Area 1 only. If the
system is configured for more than one area then you will
be prompted on the keypad to select the area you want to
work on.
Areas > Commands >
Area Status
MENU 2-0-0
Turn Area On/Off
MENU 2-0-1
Turn All Areas On
MENU 2-0-2
Turn All Areas Off
MENU 2-0-3
Move To Area
MENU 2-0-4
Chime On/Off
MENU 2-0-5
Chime Mode
MENU 2-0-6
Areas > Area Properties >
Area Name
MENU 2-1-0
S e c u r i t y S y s t e m
Use the [
] and [
] keys to scroll cursor left and right.
Use the [0] – [9] keys or the [
] and [
] keys to scroll
characters, then press [OK] to save. Press [OFF] to clear
text from the current cursor position.
Areas > Properties >
General Options
MENU 2-1-1
1
Exit Time Restart
N
2
Reset Alarm Memory
N
3
Duress Allowed
Y
4
Fault ACK Required
N
5
One Key Arming
Y
6
One Key Part On
Y
7
Link To Common Area
N
8
One Key Part Off
N
Use the [
] and [
] keys to scroll the list of options. Select
the option required, then press [ON] or [OFF] to enable or
disable. A [
] will display to indicate option set. Press [OK]
to save when finished.
Areas > Properties >
Input Options
MENU 2-1-2
1
Non Sequential
Y
2
Pulse Count H/Over
Y
3
Senior Watch
N
4
Reset Smoke On Arming
Y
5
Reserved
N
6
Reserved
N
7
Reserved
N
8
Reserved
N
Use the [
] and [
] keys to scroll the list of options. Select
the option required, then press [ON] or [OFF] to enable or
disable. A [
] will display to indicate option set. Press [OK]
to save when finished.
Areas > Properties >
Output Options
MENU 2-1-3
1
SPK Beeps Keyfob
Y
2
SPK Beeps Key/Sw
Y
3
SPK Strobe In Part On
Y
4
Alarm On PIN Retry
Y
5
Alarm Exit Error
N
6
Alarm Key/Sw Tamper
Y
7
Reserved
N
8
Reserved
N
Use the [
] and [
] keys to scroll the list of options. Select
the option required, then press [ON] or [OFF] to enable or
disable. A [
] will display to indicate option set. Press [OK]
to save when finished.
Areas > Properties >
Reporting Options
MENU 2-1-4
1
Report PIN Retry
Y
2
Report Exit Error
Y
3
Smart Lockout
N
4
Reserved
N
5
Cancel Report
Y
6
Reserved
N
7
Op/Cl In Part On
N
8
Op/Cl After Alarm
N
Use the [
] and [
] keys to scroll the list of options. Select
the option required, then press [ON] or [OFF] to enable or
disable. A [
] will display to indicate option set. Press [OK]
to save when finished.
