Bosch Solution 144, Быстрый старт, Страница: 41 / 56

41
Bosch Security Systems 10/12 BLCC600R
Solution 144 Quick Start Guide
Comms > Reporting
System Route
MENU 5-4-3
00 - Log Events Only 0 1
01 - Dest 1 + Log
02 - Dest 2 + Log
03 - Dest 1 & 2 + Log
04 - Dest 2 If 1 Fails
Use [

] and [

] keys or enter 0 - 4 + [OK]. Enter single
option only. (*** System Wide Parameter ***).
Comms > Reporting
Emergency Route
MENU 5-4-4
00 - Log Events Only 0 1
01 - Dest 1 + Log
02 - Dest 2 + Log
03 - Dest 1 & 2 + Log
04 - Dest 2 If 1 Fails
Use [  ] and [  ] keys or enter 0 - 4 + [OK]. Enter single
option only. (*** System Wide Parameter ***).
Comms > Reporting >
Swinger Dialler
MENU 5-4-5
(*** System Wide Parameter ***) 0 6
Enter 0 – 15 + [OK] to program number of times the dialler
can report before lockout. 0 = Unlimited.
Comms > Reporting >
Burg Report Delay
MENU 5-4-6
(*** System Wide Parameter ***) 0 0 0
Seconds
Enter 0 – 255 s [OK] to program the delay time in
seconds before reports are sent. 0 = No Delay.
Comms > Reporting >
Fire Report Delay
MENU 5-4-7
(*** System Wide Parameter ***) 0 0 0
Seconds
Enter 0 – 255 s [OK] to program the delay time in
seconds before reports are sent. 0 = No Delay.
Comms > MyAlarm >
IP Address
MENU 5-5-0
Factory Set
Comms > MyAlarm >
IP Port
MENU 5-5-1
Factory Set
Comms > MyAlarm >
MyAlarm Options
MENU 5-5-2
1 Reserved N
2
Reserved
N
3 Reserved N
4 Reserved N
5
Reserved
N
6 Reserved N
7 Reserved N
8
Reserved
N
Use the [

] and [

] keys to scroll the list of options. Select
the option required, then press [ON] or [OFF] to enable or
disable. A [

] will display to indicate option set. Press [OK]
to save when finished.
i
Note
Menu’s 5-5-0 and 5-5-1 should be left at the factory
default settings unless you are advised otherwise
by the manufacturer.
Comms > MyAlarm >
Gateway Numbers
MENU 5-5-7
SMS Primary
1
Digits
32
1 8 3 2 1 3 4 5 0 6 4 1
SMS Secondary
1 Digits 32
1 8 3 2 1 3 4 5 1 8 2 5
Email
1
Digits
32
1 8 3 2 1 3 4 5 2 5 0 5
MyAlarm
1
Digits
32
1 8 3 2 1 3 4 5 2 5 0 5
Use the [  ] and [  ] keys to scroll cursor left and right. Use
the [0] – [9] keys or the [  ] and [  ] keys to scroll characters,
then press [OK] to save. Press [OFF] to clear text from the
current cursor position.
Comms > MyAlarm >
Email Address
MENU 5-5-8
Email
Address
1
Characters
80
Use the [

] and [

] keys to scroll cursor left and right.
Use the [0] – [9] keys or the [

] and [

] keys to scroll
characters, then press [OK] to save. Press [OFF] to clear
text from the current cursor position. To program the ‘@’
symbol, press the [  ] key 32 times.