Bosch SENSORSTEAM TDS12 SERIES, Руководство по эксплуатации

Страница: 10 / 116

10
en
Thank you for buying the TDS12 steam iron from
Bosch.
This iron is a compact steam generator. The
water is pumped into the steam chamber with
pressure by a special pump. The steam amount
when ironing is higher than in conventional irons.
The steaming performance is therefore far more
effective. In general it is advised to use the iron
with the “eco” setting.
This appliance has been designed exclusively for
domestic use and must not be used for industrial
purposes.
Carefully read through the operating instructions
for the appliance and safeguard them for future
reference.
General safety warnings
Danger of electric shocks or fi re!
• This appliance is to be connected and used in
accordance with the information stated on its
characteristics plate.
• This appliance must be connected to an earthed
socket. If it is absolutely necessary to use an
extension cable, make sure that it is suitable for
16A and has a socket with an earth connection.
• The iron should not be used if it has been dropped,
if there are visible signs of damage or if it is
leaking water. It must be checked by an authorized
Technical Service Centre before it can be used
again.
• If the safety fuse fi tted in the appliance blows, the
appliance will be rendered inoperative. To restore
normal operation the appliance will have to be
taken to an authorised Technical Service Centre.
• In order to avoid that, under unfavourable mains
conditions, phenomena like transient voltage
drops or lighting
fl uctuations can happen, it is
recommended that the iron is connected to a power
supply system with a maximum impedance of 0.27
Ω . If necessary, the user can ask the public power
supply company for the system impedance at the
interface point.
• This appliance is not intended to be used by
persons (including children) with reduced physical,
sensory or mental capacities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning the use of the
appliance by a person responsible for their safety.
• Children should be supervised to ensure that they
do not play with the appliance.
• Remove the plug from the socket before fi lling
the appliance with water or before pouring out the
remaining water after use.
• The appliance must never be placed directly under
the tap to fi ll the water tank.
• The appliance must be used and placed on a stable
surface.
• When placed on its stand, make sure that the
surface on which the stand is placed is stable.
• The iron must not be left unattended while it is
connected to the supply mains.
• Unplug the appliance from the mains supply after
each use, or if a fault is suspected.
• The electrical plug must not be removed from the
socket by pulling the cable.
• Do not allow the power cord to come into contact
with the soleplate when it is hot.
• Never immerse the iron in water or any other fl uid.
• Do not leave the appliance exposed to weather
conditions (rain, sun, frost, etc.).
• With the aim of avoiding dangerous situations, any
work or repair that the appliance may need, e.g.
replacing a faulty mains cable, must only be carried
out by quali
fi ed personnel from an Authorised
Technical Service Centre.
Description
1. Handle with contact sensor.
2. ActiveControlAdvanced indicator lamp. (clear
light)
3. Steam setting selection button.
4. Steam setting indicator lamps.
green = eco
red = max
5. Shot of steam button.
6. Spray
button.
7. Water inlet.
8. Filling opening lid.
9. Spray nozzle.
10. Water tank.
11. Level mark for maximum
fi lling.
12. Soleplate.
13. Temperature index.
14. Temperature control.
15. Power cable.
16. Descaling
fl uid (model dependent).