1 690 386 051
2020-10-22
|
Robert Bosch GmbH
28 | SCT 415 S52 |
1.1.2 Symbols in this documentation
Obligation of the shop owner/operator
Risk of injury, risk of crushing
Mounting the column on the base plate
5.14 P-Assist S5 / cross beam mounting
5.15 Securing the cross beam in the cross beam
5.16 Instructions on back of measurement board 37
5.17 Mounting the large measurement board
5.18 Mounting the small measurement board
6.1.1 Evenness of measurement bay
39
Correcting the position of the SCT 415 S52 41
Aligning the SCT 415 S52 with the lengthwise
plane through center of vehicle
Aligning by means of the positioning device 42
Measuring the distance with the laser
Fastening the tape measure holder
Aligning the SCT 415 S52 using
the setting aid
8.10 Setting calibration board height
9.5.5 Slide / ruler mounting / ruler
9.5.6 Distance reference stand
49
9.5.10 P-Assist S5 / cross beam mounting
10.1 SCT 415 S52 dimensions and weights
10.2 P-Assist dimensions and weights
10.2.2 Temperature and working environment 51
en
en – Contents
Содержание SCT 415 S52
Страница 2: ......