Bosch RTS RVON+, Техническое руководство

Страница: 8 / 46

4 Introduction RVON+
Requirements
IMPORTANT: All legacy RVON devices (RVON-16, RVON-8, RVON-1, RVON-IO, RVON-C) running v 2.1.0 or higher
are capable of connecting to an RVON-16. Configuring these devices to connect to an RVON-16 allows
them to connect to an RVON+. All legacy RVON devices running v 2.7.0 (or higher) recognize the RVON+.


Any KP Series RVON running v 1.2.1 or higher are capable of connecting to an RVON-16. Configuring
these devices to connect to an RVON-16 allows them to connect to an RVON+. Any earlier version of KP-
Series RVON can still connect (to channels 1-16) of an RVON+ if the KP-Series RVON thinks it is
connecting to an RVON-16.


When legacy RVON devices and KP-Series RVON are configured to connect to an RVON-16, the devices
are limited to channels 1 through 16. This means you cannot access channels 17 through 32 of the RVON+
unless you upgrade the legacy device or keypanel firmware.
Features
•
16 channels of bi-directional audio expands the connectivity of the ADAM Intercom and RVON+ card.
Each channel has configurable network bandwidth parameters to accommodate individual network
functions, as well as ancillary data for keypanels and trunking control. A purchasable upgrade option is
available to expand from 16 channels to 32 channels.
•
Expanded RVON capacity for ADAM and ADAM M deployments. New maximum RVON port capacity for
ADAM is 480 ports (prior 240). New maximum RVON port capacity for ADAM M is 256 (prior 128).
•
The RVON+ card supports two fiber connections.
•
Multiple RVON devices can be viewed simultaneously and independently of the frame in which they are
located using the IPedit software.
•
Provides a virtual serial connection via an IP connection.
Application Version
RVON-Keypanel v 2.1.0 or higher
RVON-8 v 2.1.0 or higher
RVON-16 v 2.1.2 or higher
RVON-C v 2.1.0 or higher
RVON-IO v 2.1.0 or higher
KP-Series RVON v 1.2.2 or higher
AZedit v 5.4.0 or higher
IPedit v 3.6.0 or higher
VKP v 2.0.0 or higher
ODIN v 1.1.0 or higher
MCII-e v 3.5.0 or higher