Bosch RTS RVON+, Техническое руководство

Страница: 17 / 46

CHAPTER 2
RVON+ Port Allocation
Port Allocation
The PAT (Port Allocation Table) is used to support I/O cards with more than 16 ports. Use the table to select which card types
occupy which intercom slots and which ports are allocated to each card. Ports can be allocated in groups of 8 or 16. A single
frame system holds up to 880 ports.
IMPORTANT: Check power limitations of each frame before building large intercom systems.
Requirements :
The Port Allocation Table requires the following minimum firmware versions:
•
AZedit V5.4.0 or later
•
MCII-e V3.5.0 or later
•
TBX V1.0.1 or later
To assign ports to the RVON+ card in AZedit , do the following:
1.
From the Options menu, select Port Allocation Table .

The Port Allocation Table Window appears.
2.
Along the left-side of the Port Allocation Table Window, find the card slot in which the RVON+ card is installed in
the Matrix frame.
3.
Select the type of RVON+ card installed from the Type column drop down menu.
4.
Select the channel scheme for the selected RVON+ card from the Allocated column drop down menu.
5.
Select the range of ports you want to allocate from the Ports column drop down menu.

Multiple columns may be used to allocate ports.
6.
Verify there are no warnings in the Warning column.
NOTE: The Ports column only becomes active for the number of ports you are allocating. For example, if you have
32 ports, only the first two (2) Ports columns are active.