or
NYS04.2-ST-03-ULNN-NY4033 system housing, material number R911172966
or
NYS04.2-ST-04-ULNN-NY4043 system housing, material number R911172906
or
NYS04.2-ST-05-ULNN-NY4053 system housing, material number R911172907
●
DOK-NY4000-SYST*40X3**-IT09-EN-P
Instructions,
material
number
R911337318.
●
Cable connector parts for 24V System, SE, Drive Power and Motor
connections.
3 Using the Safety Instructions
3.1 Safety instructions - structure
The safety instructions are structured as shown in the following example.
Fig. 3-1: Safety instruction lay-out
3.2 Explaining signal words and safety alert symbols
The safety instructions in this documentation contain specific signal words
(danger, warning, caution, notice) and if necessary, a safety alert symbol
(according to ANSI Z535.6-2011).
The signal word is meant to draw the reader’s attention to the safety instruction
and signifies the degree of danger. The safety alert symbol (a triangle with an
exclamation point), which precedes the signal words "danger", "warning" and
"caution" is used to alert the reader to personal injury hazards.
In case of non-compliance with this safety
instruction, death or serious injury will occur.
DANGER
6/45
Using the Safety Instructions
NYCe 4000 Multi-axis motion control
system
Bosch Rexroth AG R911337318_Edition 09
