Bosch Rexroth IndraDyn T Скачать руководство пользователя страница 60

Страница: 60 / 76

●

Check any optional energy management chains (drag chains) for de‐

fects.

●

Check the protective conductor connection for proper condition and firm

seating at regular intervals and replace it, if necessary.

8.2

Service Repair, Maintenance and Spare Parts

Synchronous motors of the IndraDyn T series operate maintenance-free with‐

in the operating conditions and service life specified. However, operation un‐

der unfavorable conditions can lead to limitations in availability.
●

Increase availability with regular preventive maintenance measures. Ob‐

serve the machine manufacturer's instructions in the machine mainte‐

nance plan and the maintenance measures described below.

●

Log all maintenance measures in the machine maintenance plan.

Bosch Rexroth recommends the following maintenance measures based on

the machine manufacturer's maintenance plan:

Measure

Interval

Check the coolant system for proper

functioning.

According to the specifications in the ma‐

chine maintenance plan, but at least ev‐

ery 1000 operating hours.

Check the mechanical and electrical con‐

nections.

According to the specifications in the ma‐

chine maintenance plan, but at least ev‐

ery 1000 operating hours.

Check the machine for smooth running,

vibrations and bearing noise.

According to the specifications in the ma‐

chine maintenance plan, but at least ev‐

ery 1000 operating hours.

Remove dust, chips and other dirt in the

motor chamber from the motor housing,

cooling fins and connections.

Depending on the degree of soiling, but

after one operating year at the latest.

Fig.8-1:

IndraDyn T maintenance measures

Our worldwide service network provides an optimized and efficient support.

Our experts offer you advice and assistance should you have any queries.

You can contact us 24/7.

Service Germany

Our technology-oriented Competence Center in Lohr, Germany, is responsi‐

ble for all your service-related queries for electric drives and controls.
Contact theService Helpdesk & Hotline under:

Phone:

+49 9352 40 5060

Fax

+49 9352 18 4941

Email:

[email protected]

Internet:

http://www.boschrexroth.com

Additional information on service, repair (e.g. delivery addresses) and training

can be found on our internet sites.

Service worldwide

Outside Germany, please contact your local service office first. For hotline

numbers refer to the sales office addresses on the Internet.

Preparing information

For quick and efficient help, please have the following information ready:
●

Detailed description of the fault and the circumstances

Bosch Rexroth AG

DOK-MOTOR*-MBT********-IT02-EN-P

Rexroth IndraDyn T Synchronous Torque Motors

58/73

Maintenance and Repair

Содержание Rexroth IndraDyn T













































































Результаты поиска

Содержание Rexroth IndraDyn T

Отзывы:

Похожие инструкции для Rexroth IndraDyn T

Бренды по названию

Популярные бренды

Bosch Rexroth IndraDyn T, Инструкция по эксплуатации

Результаты поиска

Содержание Rexroth IndraDyn T

Отзывы:

Похожие инструкции для Rexroth IndraDyn T

Бренды по названию

Популярные бренды