8
Standards
8.1
Used Standards
Standard
Description
EN 60 204-1
Electrical equipment of machines
EN 60 61000-6-4
Generic standards - emission standard (industrial environ‐
ments)
EN 60 61000-6-2
Generic standards – noise immunity (industrial environ‐
ments)
EN 61558-2-6
Transformer for 24 V power supply unit, protective separa‐
tion
EN 60664-1
Overvoltage category II
EN 61 131-2
24 V outputs requirements
EN 61 131-2
24 V current supply requirements
EN 60950
Clearances and creepage distances office (environment)
and power units
ISO 13850
Safety of machinery, emergency stop devices
EN 60 529
Degrees of protection (including housings and installation
compartments)
EN 60 068-2-6
Vibration test
EN 60068-2-27
Shock test
EN 60721-3-3
Classification of ambient conditions
EN 60721-3-2
Classification of ambient conditions
EN 60721-3-1
Classification of ambient conditions
UL 508
Industrial Control Equipment
Fig.8-1: Used standards
8.2
CE Marking
8.2.1
Declaration of Conformity
The electronic products described in this project planning manual comply with the re‐
quirements and goals of the following EU directives and with the harmonized European
standards:
EMC Directive 2004/108/EC
The electronic products described in this project planning manual are intended for the
use in industrial environments and comply with the following requirements:
Bosch Rexroth AG
Standards
DOK-SUPPL*-VSP*XX.3***-IT01-EN-P
Rexroth IndraControl VSP xx.3 Panel PC
16/43
