Bosch Rexroth IndraControl VDP 40.3, Руководство по планированию проекта

Страница: 32 / 64

5.3 Electric connection
5.3.1 Power routing 230 V
PE PE PE
PE PE
PE
6 mm² (green/yellow)
16 mm² (green/yellow)
Min. 16 mm² (green/yellow)
To the housing of the control cabinet
PE neutral point
230V
400V
4 mm² (green/yellow)
16 mm² (green/yellow)
4 mm² (green/yellow)
Fuses, better: protective motor switches
W1 N
V1 U1
L1 L2 L3 N
Leads
L1.1 L2.1 L3.1 N
PE
PE N U2 PE
1
PE N1 U2
4 mm² (green/yellow)
Length max. 4 m
Power supply unit
VAP01.1H-W23
024-010-NN
+24 V
0 V
DC 24 V
Overvoltage
category I
Overvoltage
category III
Overvoltage
category II
To the device
All housing parts (functional earth)
Terminals in
isolated
arrangement
e.g. drives
230 V power supply
operator terminals
service plug receptacle(s)
Transformer
acc. to EN 60742
N conductor:
Use only with
permission of
the operator!
Fig. 5-19: Power routing 230 V
High electrical voltage! Danger to life and risk
of injury caused by electric shock or bodily
harm caused by supply voltage on the
protective extra-low voltage (e.g. +24 V)!
DANGER
Power supply units, whose net connection is designed for overvoltage
category II, are to be connected to a net voltage with overvoltage category II,
refer to fig. 5-19 "Power routing 230 V" on page 26 .
Danger to life and risk of injury caused by
connection of power supply units, which
cause protective extra-low voltage (e.g. +24
V), to supply voltages, for which they are not
designed.
DANGER
Power supply units, whose net connection is designed for overvoltage
category II, are to be connected to a net voltage with overvoltage category II,
refer to fig. 5-19 "Power routing 230 V" on page 26 .
26/57
Dimensions, Installation and Wiring
IndraControl VDP 16.3, VDP 40.3, VDP 60.3 Operator Dis‐
play
Bosch Rexroth AG R911323862_Edition 07