Bosch Rexroth IndraControl VDP 40.3, Руководство по планированию проекта

Страница: 35 / 64

6 Display and operating components
6.1 Backlight switch-off
The service life of the backlight of the display is limited (see chapter 4.5
"Wear parts" on page 15 ).
To extend the service life of the LCD backlight, the flat screen display is
provided with a backlight switch-off. This function "darkens" the display when
the panel PC has been not operated for a certain period of time. The length
of the time interval can be specified in the Windows Control Panel under
"Power Options", see fig. 6-1 "Setting the darkening mode of the display in
the Windows Control Panel" on page 29 .
Fig. 6-1: Setting the darkening mode of the display in the Windows Control
Panel
6.2 Operating and error displays
There are four LEDs as on the top of the front panel to display the device
conditions and errors of the connected control cabinet PC. Take one of the
following measures if one of the succeeding LEDs displays an error or a note.
Depending on the connected control cabinet PC, not all LEDs are
activated. Therefore, not all messages are displayed.
For further information, please refer to the relevant documentation
of the control cabinet PC.
IndraControl VDP 16.3, VDP 40.3, VDP 60.3 Operator Display 29/57
Display and operating components
R911323862_Edition 07 Bosch Rexroth AG