Bosch Rexroth IndraControl VDP 16.1, Руководство по планированию проекта

Страница: 63 / 90

VDP 16.1, VDP 40.1 and VDP 60.1 Interfaces
7-5
DOK-SUPPL*-VDP16/40/60-PR02-EN-P
Mouse Interface
The mouse interface (XPS2MS) can be connected to an external mouse.
The data are transmitted via the GIGASTAR interface to the IPC.
PS/2 Mini-DIN female connector, 6-pin
Cable length: Max. 1.5 m
Cable type: Shielded, cross section min. 0.14 mm²
Interrupt (IRQ): 12
BIOS presettings: PS/2 mouse support: Enabled
PS/2 mouse: Auto detect
Mouse Clock
Mouse Data
max. 1.5 m
Mouse
Power, +5VDC
Shield applied to the metal housing
of the plug-in connection
1
2
3
4
5
6
GND
Shield
XPS2MS
Maus_sst.FH9
Fig. 7-7: Mouse interface XPS2MS
If a PS/2 mouse is not recognized by the system, the mouse has to be
activated in the BIOS by switching from "Disabled" to "Autodetect". The
operating system will not recognize the plugging-in of an external mouse
after completed startup, because the mouse initialization occurs during
the booting process.
Note: The connected mouse must be PS/2-compatible. Normally,
the BIOS reserves IRQ 12 for the PS/2 mouse. If there are
address conflicts, e. g., if IRQ 12 has already been occupied
by another PC extension card, you should change the IRQ of
this extension card to another IRQ, that is still free.
Note: If a keyboard with mouse is connected to the VDP, no further
mouse may be connected to the mouse interface.
XPS2MS – PS/2 Mouse Interface