Bosch Rexroth IndraControl S67 Series, Описание приложения

Страница: 112 / 142

1. The CS-LED begins with initiation of the start-up phase: fast blink pulses
of approximately 1 second.
2. A one-second pause occurs.
Group number 1: S-BUS error
3. The first position of the CS-LED flashes: 0.5 s on and off.
4. The initiation of the error code follows with a pause of two seconds, 40
ms of flashing and another pause of two seconds
Error code 13: Software update for the I/O module failed
5. The CS-LED flashes once for the tens place.
6. A two-second pause occurs.
7. The CS-LED flashes once for the unit place.
8. The initiation of the error argument follows with a pause of two seconds,
40 ms of flashing and another pause of two seconds
Error argument 5: I/O module in the sixth slot
9. The digit place of the CS-LED flashes 5 times.
10. A four-second pause occurs.
The blink code starts when the start phase is initiated. This process is repea‐
ted if there is only one error, with multiple errors the next pending error is pro‐
cessed.
1 2 3 5 6 7
8
10
4
9
Pos: 51.14 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21808 @ @ 1
Fig. 10-6: Blink code progress
10.5.4 Meaning of Blink Codes and Measures for Error Recovery
This chapter lists all errors and warnings that are issued by the LED(s) listed
below.
The errors and warnings are divided into the following error groups:
Bosch Rexroth AG DOK-CONTRL-S67S3BKDI8*-AP03-EN-P
Rexroth IndraControl S67 Sercos Coupler 8 Digital Inputs (M8)
110/139
Diagnostics