Bosch Rexroth IndraControl L25, Инструкция по эксплуатации

Страница: 52 / 68

Key Menu navigation Input functions
<Up>
(up arrow) One menu entry up Increase parameter value
<Enter> One level down Confirm input
Fig.12-3: Functions of the operating keys
Reset button and stop LED on the
control
The reset button and a red LED are arranged in the section below the dis‐
play.
Fig.12-4: Reset button and stop LED
Reset button
Press the reset button (> 2 seconds). This resets the whole de‐
vice and a restart is forced, without the need to switch off the sup‐
ply voltages.
The reset button can only be actuated with a sharp tool (e. g. a tip of a pen‐
cil).
LED on the control The LED serves for diagnostic display and status display.
The device states displayed are firmware-dependent and are described in the
relevant system description.
Display elements on the modules
and voltage supply connector
Depending on the connected modules, further display elements are available
in addition to the display elements on the control. For details, please refer to
the relevant instructions of the modules.
Bosch Rexroth AG DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
50/65
Device Description