Bosch Rexroth IndraControl L25, Инструкция по эксплуатации

Страница: 36 / 68

10.4 Mounting the Fan (if Necessary)
X7E5
X2R
X7P
X7E3
X7E4
X7E1
X7E2
1
2
① Control bottom side
② Fan
Fig.10-16: Mounting the fan
1. Put the fan ② onto the control ①, see 10-16 .
2. Latch in the fan by exerting slight pressure.
10.5 Dismounting the Control
Necessary tools
● Screwdriver
Dismounting steps
Dismounting step: Separating function modules from the control (if
function modules have been mounted)
1. Remove the left end clamp first.
2. Slide the function modules along the top-hat rail to the left until the plug
connection of the PCI
PLUS
bus is separated.
Dismounting step: Removing the first Rexroth Inline terminal (if Inline
terminals have been mounted)
1. Start with the first Inline terminal that is mounted to the right of the con‐
trol.
All connectors of the terminal must be removed.
2. Remove the labeling field, if present (A1 in 10-17 ).
3. Pry out the connector of the terminal to be removed by pressing on the
rear connector shaft latch (A2 in 10-17 ).
Bosch Rexroth AG DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
34/65
Mounting, Dismounting and Electrical Installation