Bosch Rexroth ID 40 Скачать руководство пользователя страница 151

Страница: 151 / 176

Web interface 151/176

3 842 530 344/2014-05, MIT: ID 40,

Bosch Rexroth AG

Example:

The high byte of the MDT status register and the MDT data area from addresses
200–399 are read and also applied to the prefetch configuration. This

adrset

automatically read starting with the next MDT.

http://id40-slk/xid/bal-mem?adrset=200.399&prefetch=1

• The prefetch read command can only be sent in the

CONNECTED

state, otherwise

the prefetch

adrset

is not entered. The data from the current MDT is returned.

• The prefetch is only activated for the

adrset

specified in the command string. Any

deviating prefetch settings from a previous command are automatically deleted.

• If the

&prefetch

parameter is omitted from the read command, the data

is returned, but all prefetch settings are deleted. This also applies to the

&prefetch=0

parameter.

PROOF COPy 1 | 20.05.2014 | FOR INTERNAL USE ONLy

GLISH

Содержание Rexroth ID 40

















































































































































































Результаты поиска

Содержание Rexroth ID 40

Отзывы:

Bosch Rexroth ID 40, Руководство пользователя, Страница: 151 / 176

Результаты поиска

Содержание Rexroth ID 40

Отзывы: