manualshive.com logo in svg

Bosch Rexroth Hagglunds DOb, Руководство по установке и обслуживанию

Поделиться
Скачать
Bosch Rexroth Hagglunds DOb Скачать руководство пользователя страница 22

22/80 

Transport and storage

Bosch Rexroth AB, 

Installation and maintenance manual, Hägglunds DOb, RE 15327-WA/05.2017

6.2  lifting the packed drive unit

The packed drive unit is marked with centre of gravity and weight. Normally the drive 
unit package is designed for forklift truck handling.

 wARNING

Packed unit can tip

Danger to life or risk of injury, damage to equipment 

 

▶

Centre of gravity is high, see label on the crate. 

 

▶

Avoid rapid acceleration, deceleration and turns while moving the goods.

 

▶

Position the forks according to the instructions in 

6.2: Lifting the packed drive 

unit, section Lifting with fork lift

Fig. 6: Maximum width of forks lifting packed drive unit

lifting with fork lift

The lifting of drive unit must be done from long side of the drive unit. 
See 

Fig. 6

 for maximum total width of the forks.

Position forks about the centre of gravity at lifting. 

DD00083913

Содержание Rexroth Hagglunds DOb

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды