22/56 Assembly
Bosch Rexroth AG, MIT: EL 2, 3 842 558 372/2021-10
Modifying the mounting position of the terminal box
Fig. 10:
558 371-16
SW8
4x
M = 5 Nm
D
1
2
1
2
90°C
180°C
270°C
Modifying the mounting position of the terminal box
1.
Remove the motor
from the gear.
2.
Install the motor in
the correct position
(terminal box).
Please note:
• Do
not tilt the motor
and make sure it has the
necessary clearance area
for installation.
• Install the motor in the
proper position (terminal
box) and connect it to
the gear.
• If the motor is not in
the proper position: do
NOT rotate the motor.
Disconnect the motor
from the gear and
reconnect it.
