Product description
CS351_zweispaltig - D.book Seite 72 Donnerstag, 2. Oktober 2014 8:36 08
CS351/CC-CS351
| 3 609 929 B45/2019-12
64
/
96
Bosch Rexroth AG
2. Cut-out via the end step
In addition, the motor OFF can be switched
via the end step or along with the cut-out via
the motor contactors (double protection).
Fig. 9:
Motor OFF circuit 2 (NH2) connection to the Compact System
Use of the ErgoSpin/CC-ErgoSpin hand-held nutrunner as a stationary tightening spindle (valid
for “ 1. Cut-out via the internal motor contactors” and “ 2. Cut-out via the end step”)
If the ErgoSpin/CC-ErgoSpin hand-held nutrunner is used as a stationary tightening spindle, the
start switch must be continually actuated.
Fig. 10:
Start switch lock on the
ErgoSpin hand-held nutrunner
1
Band with Velcro® (see ErgoSpin
accessories)
X D N 1
1 2 3 4
S1
Einsatz
Motor-Stopp-Schalter
1 mm
2
VEE NH2
NH2
1
