ENGLISH
CS351_zweispaltig - D.book Seite 99 Donnerstag, 2. Oktober 2014 8:36 08
CS351/CC-CS351
| 3 609 929 B45/2019-12
Bosch Rexroth AG 85
/
96
Decommissioning/ Disassembly and replacement
10 Decommissionin
g
The Compact System is a component that does
not require decommissioning. As a result, this
chapter of the manual does not contain any
information.
For details about how to disassemble or replace
your Compact
System
please
refer
to chapter “11
Disassembly
and replacement” on page
85
.
11 Disassembly and
replacement
The Compact System must be considered a unit.
As a result, the entire Compact System must be
exchanged if there are any defects or
malfunctions.
For complaints and repairs, please send the
fully
assembled
Compact System to the supplier or
our customer service workshop in Murrhardt,
Germany. Complaints and repairs cannot be
accepted if this procedure is not followed.
Disassembling
Follow the warnings printed on the label on the
Compact System:
Fig. 32:
Label on the Compact System
WARNING
Dangerous internal voltage!
Before opening the device or performing
maintenance work, make sure that the
device is deenergized, protect it from
being switched on again, and allow a 90
second discharging time.
Read the manual before using the system
or performing maintenance work.
